Double Press Connectors

Updated at May 5th, 2023

Tip - Double Press Connectors have two connection points and are designed for one connection point for the backplane and the other for the busbar.  An alternative option is to use one Double Press Connector for backplane and a separate Double Press Connector for busbar.  This is the same concept as the Single Press Connector but it provides more contact area between the connector and LumiLor.

Gap Size Specifications

The gap between the two connection points MUST be between 1/8" and 3/8" for the Double Press Connector to work properly.

Double Press Connectors:

  • Adhere with 3M All Weather Tape
  • Spring loaded gold contacts
  • Male connector
  • Paintable
  • 22 AWG Wire
  • Use copper tape between substrate and connector for the most robust connection possible.
 

Did this article help you?