Contact Support

Sorry, we didn't find any relevant articles for you.

Please fill out the contact form below and we will reply as soon as possible.

  • Home
  • LumiLor Application Process

LumiLor Application Process

Questions

  • Backplane Application

    Before Applying LumiLor Review LumiLor - Success Starts Here before applying Lumi...

  • Dielectric Application

    Dielectric Equipment and Materials HVLP system with 1.3mm nozzle and PSI of 20 - ...

  • LumiColor Application

    LumiColor Equipment and Materials HVLP system with 1.3mm nozzle and PSI of 20 - 2...

  • Busbar Application

    Busbar Overview Videos Busbar and Backplane Backplane and Busbar SHOULD NOT be ap...

  • Connector Application

    Connector Equipment and Materials Multimeter JB KwikWeld mixing plate and popsicl...

  • Conductive Top Coat (CTC) Application

    CTC Equipment and Materials HVLP system with 1.3mm nozzle and PSI of 20 - 25 Disp...

  • Connectors - Final Step

    Connectors; Final Step Equipment and Materials J-B KwikWeld Sandpaper Connector A...

  • Encapsulating Clear Application

    Encapsulating Clear Application Key Points A fast drying automotive grade “speed ...

  • Final Clear Coat Application

    Final Clear Coat Application Key Points The final clear coat will be a solvent ba...

  • Blackout Topcoat (optional)

    Blackout Equipment and Materials Vinyl liner tapeMasking tapeSpray equipment of c...

  • LumiLor Training Videos for Starter Kits

    2oz Starter Kit Process If you are using the 2oz LumiLor Starter kit be sure to s...

Quick Links:

Haven't found the answer you're looking for?

Contact Support

Powered by